Hawkeye 鹰眼科技 Home Tech Split Cam 查看内容

Hawkeye Firefly 4K Split Cam Firmware 鹰眼 4K 卡录 固件 0802

2019-8-2 11:51| 发布者: 鹰眼| 查看: 281| 评论: 0

Update List:
1. Fixed OSD(date time) can't turn off .
2. Add Hawkeye Wihte Balance, the white balance will keep stable .
3. Optimize Manual shutter(Electronic shutter), Suggestion: Set ISO to a fixed value if you use Manual shutter. Brighter, Lower ISO value will make less noise.
4.Optimaze ESI.
5. Fixed the problem that can't save photo in "Snapshot in recording " Mode.

Suggest settings:
1. Sharpness: Soft.
2. White Balance: Hawkeye.

Download: 

How to update:

1.Delete all the files and folders in the tf card(suggest:8G/16G).
2.Download the firmware to sd card .
3.Put the sd card into camere(make sure battery > 50%).
4.Power on the camera and it will update firmware automatically.
5.When updating, the LED will flash it takes about one minutes, Don't power off when updating, or it will....die.
6.When update finish, the camera will turn on again.


更新列表:
1.解决了OSD不能关闭的问题。
2.增加 “鹰眼白平衡”, 白平衡会一直保持稳定,不会变色。
3.优化电子快门选项, 注意: 使用电子快门时,建议将ISO固定为某一个值;越亮的地方,ISO可以越小,噪点也会越小。
4.优化陀螺仪防抖效果。
5. 解决录中拍,不能保存照片的问题。

建议设定:

1. 锐度:柔和。

2.白平衡: 鹰眼。

更新方法:
1.先将TF卡(8G/16G)清空所有文件/文件夹 .
2.下载固件到 SD 卡上 .
3.将SD卡放到机器里面.
4.重新开机(注意电池必须保证电量>50%).
5.更新过程中,LED灯会闪烁,更新过程需时1分钟,更新过程请勿关机,否者....会成砖.
6.更新完成后,机器会自动关机.
7.更新完成后,长按电源键重启即可 .

链接:https://pan.baidu.com/s/1dSeCx4NBN20SWsE9CLf1-Q 
提取码:ybet 
 
 
QQ在线咨询
咨询热线
+86-134-243-36270
返回顶部